--- 31 ---
Fig. 14
[30]
[20]
[29]
Protrusion
Protrusion
Concave portion
Concave portion
(5) Reassembly of the drive unit
(a) Fit the protrusion of the Motor Spacer
[30]
in the concave portion of the Rear Case
[20]
engaging the
pinion of the Armature and Pinion Set
[31]
with Planet Gear (A) Set (4 pcs.)
[27]
. Turn it fully clockwise
viewing from the rear of the Armature and Pinion Set
[31]
(see Fig. 14).
Top view
Protrusion
[21]
Concave portion
Side view
[42]
Groove portion of slide ring gear
Indication "LOW"
Fig. 15
(b) Mounting the Shift Arm
[21]
and the Shift Knob
[42]
(see Fig. 15).
Mount the Shift Arm
[21]
to the protruded side of the Rear Case
[20]
. At this time, insert the protrusion of
the Shift Arm
[21]
into the hole of the Rear Case
[20]
and check that the protrusion is inserted into the
groove of the Slide Ring Gear
[23]
that is mounted in the Rear Case
[20]
(see Fig. 8).
Insert the Shift Arm
[21]
into the groove of the Shift Knob
[42]
facing "LOW" indication on the Shift Knob
[42]
backward.
1
2
