--- 17 ---
Remark* Number of machine screws fastened per charge
Remark*1 Number of holes or fasteners per charge
The above table shows an example of test data. The batteries used in this test are as follows:
Model DV 14DMR, DV 14DV, Q, C: 3.0 Ah
E, B (EURO): 2.4 Ah
B (U.S.A.): 2.0 Ah
As actually measured values listed in the above table may vary depending on sharpness of the drill bit, workpiece
hardness (particularly in wood materials), moisture content of wood, charging condition, operator skill, etc.
This data should be used as a comparative guide only.
Type of work
Maker
Model
Working capacity (*1)
Driling
speed
(sec./pc.)
*0
*600
*1200
*1800
*2400 *3000
B (U.S.A.)
B (EURO)
*990
*980
*790
*970
*1350
*1350
*1730
< High speed >
0.4
0.6
0.4
0.5
0.5
0.5
0.5
DV 14DMR
HITACHI
E
DV 14DV
Q
C
