Safety Information A-5
When Installing and Relocating the Printer
Power Specifications
Three power specifications follow. The one that applies to the printer you
are using depends on your specific configuration.
Using Power Plugs
Ensure that the plug connection is free of dust. In a damp environment, a
contaminated connector can draw a non-negligible amount of current that
can generate heat and eventually cause a fire over an extended period of
time.
Rated
Voltage
Rated
Frequency
Rated Current
100-127V
50/60 Hz
9.5A
220-240V
50/60 Hz
5.2A
WARNING!
Connect the power plug only to a properly rated power outlet.
Otherwise, a fire or shock hazard may result.
Never use multi-plug adaptors to plug multiple power plugs into
the same power source. Be sure to operate the printer on a sole-
use receptacle. Multiple connectors can cause overheating and
a fire could result.
Summary of Contents for DDS 32
