Hitachi CP-X2 series User'S Manual And Operating Manual Download

Page: 58 / 170

Turn the projector off, and unplug the power cord. Allow the

projector to cool sufficiently.

After making sure that the projector has cooled adequately,

pull the slot cover forward, pushing slightly its edge up, and

remove it from the projector.

Remove the battery case.

Hold the battery case gutter by finger nail or other thing and pull

out the battery case slowly from the battery slot.

Take the old battery out from the battery case.

Replace a new battery.

Replace battery with

HITACHI MAXELL, Part No.CR2032

only. Use of another battery may present a risk of fire or

explosion.

Put a new battery into battery case. Please make sure that

the + is facing upward. Insert the battery case slowly into the

battery slot until you hear the snap.

Close the slot cover.

Replace the slot cover by reversing the procedure used

when removing the cover.

Maintenance

WARNING

►Always handle the batteries with care and use them only as directed. Battery

may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

And also improper use may result in cracking or leakage, which could result in fire, injury and/or

pollution of the surrounding environment.

•

Be sure to use only the batteries specified. Do not use batteries of different types at the same

time. Do not mix a new battery with used one.

•

Make sure the plus and minus terminals are correctly aligned when loading a battery.

•

Keep a battery away from children and pets. If swallowed consult a physician

immediately for emergency treatment.

•

Do not short circuit or solder a battery.

•

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

•

If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid

adheres to your body or clothes, rinse well with water immediately.

•

Obey the local laws on disposing the battery.

Internal clock battery

Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has

stopped, please replace the battery according to the following procedures.

NOTE

•

The internal clock’s time will be reset when the battery is removed.

Please reconfigure the time via the menu or a web browser after replacing the battery.

(



2.5.7 Date/Time Settings of the User’s Manual - Network Functions)

SD C

ARD

Slot Cover

Battery Slot

Battery Case

Battery

Case

Battery

Case

Battery (+)

Battery (-)

Summary of Contents for CP-X2 series











































































































































































Search results

Summary of Contents for CP-X2 series

Reviews:

Related manuals for CP-X2 series

Brands by name

Popular brands

Hitachi CP-X2 series, User'S Manual And Operating Manual

Search results

Summary of Contents for CP-X2 series

Reviews:

Related manuals for CP-X2 series

Brands by name

Popular brands