Hitachi CP-X2 series User'S Manual And Operating Manual Download Page 115

Page: 115 / 170

3. How to use Projector software – Basics -

This section explains how to use the “MIU Live Viewer”.

3.1 How to use “MIU Live Viewer”

3.1.1 Install “MIU Live Viewer”

In order to use the projector with a PC for Live Mode, you will first need to install

the accompanying software on all the PCs you will be using.

• OS:

Windows 2000 Professional Service Pack4,

Windows XP Home Edition/Professional

• Graphic Interface: DirectX 6.1a or higher;

Video RAM 4MB or higher (8MB recommended)

• CPU:

Pentium III (600MHz or higher recommended)

• Display:

VGA 640x480 or higher (XGA 1024x768 recommended) 65,536

simultaneous colors or higher

• Set your PC’s resolution to XGA or less.

• In some cases, Screen will not be displayed correctly. If the received image

resolution is larger than 1024x768, projector can display only the 1024x768

portion of the image.

• Images might not been transmitted, caused by OS version or the driver

software for Network Adaptor.

It is highly recommended that OS and the driver should be updated to the latest.

NOTE

Minimum PC Hardware and Software Requirements

• Memory:

64MB or higher (128MB or higher if using Windows XP)

•

Available Hard Disk Space: 10MB or higher

• Web browser:

Internet Explorer® (5.5 or higher)

• CD-ROM drive

• PC with PC card slot (PCMCIA Type-II) interface and IEEE802.11b/g wireless

LAN PC card or PC with USB Interface and IEEE802.11b/g wireless LAN USB

adaptor.

• Not required for PCs with built-in 802.11g wireless LAN.

• Depending on the type of wireless network card and PC you are using, the

projector may not be able to communicate properly with your PC, even if the

PC you are using is equipped with built-in wireless LAN functionality.

Should communication problems occur, please procure a Wi-Fi certified

wireless network card.

NOTE

3. How to use Projector software – Basics -

Summary of Contents for CP-X2 series











































































































































































Search results

Summary of Contents for CP-X2 series

Reviews:

Related manuals for CP-X2 series

Brands by name

Popular brands

Hitachi CP-X2 series, User'S Manual And Operating Manual

Search results

Summary of Contents for CP-X2 series

Reviews:

Related manuals for CP-X2 series

Brands by name

Popular brands