51
Operating
1.
Using the magnify feature
2.
3.
4.
Press the
MAGNIFY ON
button on the remote
control.
The picture will be magnified, and the MAGNIFY
dialog will appear on the screen. When the
MAGNIFY ON
button is pressed for the first time
after the projector is turned on, the picture will be
zoomed by 1.5 times. On the dialog, triangle marks
to show each direction will be displayed.
The display magnification of the projector switches in order
with every press of the
MAGNIFY ON
button.
For computer signals, HDMI
TM
(RGB) signals, HDBaseT
TM
signals,
DisplayPort signals, input signals from the LAN port
1.5 times
2 times
3 times
4 times
1 time
For video signals, DisplayPort signals, HDBaseT signals, SDI signals,
or HDMI
TM
signals
1.5 times
2 times
1 time
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor
buttons to shift the magnifying area.
Press the
MAGNIFY OFF
button on the remote control to exit magnification.
MAGNIFY
ON / OFF
button
• The MAGNIFY dialog will automatically disappear in several seconds
with no operation. The dialog will appear again if the
MAGNIFY ON
button is
pressed when the dialog has automatically disappeared.
• The magnification is automatically disabled when the displaying signal or its
display condition is changed.
• While the magnification is active, the keystone distortion condition may vary. It
will be restored when the magnification is disabled.
• Some horizontal stripes might be visible on the image while magnification is
active.
• This function is not available in the following cases:
- A sync signal in the range not supported is input.
- There is no input signal.
NOTE
