35
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
Turning on the power
2.
Make sure that the
POWER
indicator is
lighted in steady orange (
117
). Then
remove the lens cover.
3.
Press
STANDBY/ON
button on the projector
or the
ON
button on the remote control.
The projection lamp will light up and
POWER
indicator will begin blinking in
green. When the power is completely on, the indicator will stop blinking and
light in steady green (
117
).
Power on/off
To display the picture, select an input signal according to the section
Selecting an
input signal
(
38
).
1.
Press the
STANDBY/ON
button on the projector or the
STANDBY
button on
the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
Turning off the power
2.
Press the
STANDBY/ON
or
STANDBY
button again while the message
appears.
The projector lamp will go off, and the
POWER
indicator will begin blinking
in orange. Then the
POWER
indicator will stop blinking and light in steady
orange when the lamp cooling is complete (
117
).
3.
Attach the lens cover, after the
POWER
indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
Power on/off
POWER
indicator
ON
button
STANDBY
button
STANDBY/ON
button
SHADE
(continued on next page)
