Hitachi CP-CW251WN User Manual Download

Page: 1 / 113

Projector

CP-CX301WN/CP-CW251WN/CP-CW301WN

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “

Safety Guide

” first. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ

slightly from your projector.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.



NOTICE

This entry notices of fear of causing trouble.

Summary of Contents for CP-CW251WN


















































































































Search results

Summary of Contents for CP-CW251WN

Reviews:

Related manuals for CP-CW251WN

Brands by name

Popular brands

Hitachi CP-CW251WN, User Manual

Search results

Summary of Contents for CP-CW251WN

Reviews:

Related manuals for CP-CW251WN

Brands by name

Popular brands