27
CALIBRATION
ASPECT
ACCENTUALIZER HDCR
AV MUTE
POSITION
ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
1
2
ENTER
D-ZOOM
-
+
＋
ー
VOLUME
MAGNIFY
MYBUTTON
INPUT
KEYSTONE
TEMPLATE
1.
Press the
POSITION
button on the remote control while no menu
is on screen, to display the D-SHIFT (
44
) dialog on screen.
Adjusting the position
2.
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the
POSITION
button again to finish this operation.
● This is a function to shift the position of the shrunken picture by the D-ZOOM (
44
)
function.
● When an OSD (On Screen Display) menu is displayed, this operation moves the
position of the OSD menu, but not the position of the picture (
31
).
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 256 (full
screen).
(CP-CX301WN)
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 320 (full
screen).
(CP-CW251WN/CP-CW301WN)
Operating
POSITION
button
CALIBRATION
ASPECT
ACCENTUALIZER HDCR
AV MUTE
POSITION
ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
1
2
ENTER
D-ZOOM
-
+
＋
ー
VOLUME
MAGNIFY
MYBUTTON
INPUT
KEYSTONE
TEMPLATE
1.
Correcting the keystone distortions
2.
Press the
KEYSTONE
button on the remote control.
A dialog will appear on the screen to aid you in correcting the
distortion.
Use the ◄/► cursor buttons for adjustment.
To close the dialog and complete this operation, press the
KEYSTONE
button again. Even if you do not do anything, the
dialog will automatically disappear after about ten seconds.
● The adjustable range of this function varies for each input signal. For some input,
this function may not work well.
● When the projector is inclined to near ±5 degrees or over, this function may not
work well.
● The OSD menu might be displayed outside of the image display area depending
on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing
the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.
KEYSTONE
button
