background image

64

OPTION menu

Item

Description

SERVICE

Selecting this item displays the SERVICE 

menu.

Select an item using the ▲/▼ buttons, and 

press the ► button or the 

ENTER

 button 

on the remote control to execute the item.

ALTITUDE

Using the ▲/▼ buttons switches the rotation speed of the cooling 

fans. If the projector is used at an altitude of about 1600 m or higher, 

select HIGH. Otherwise, select NORMAL. Note that the projector is 

noisier when the HIGH is selected.

HIGH 

ó

 NORMAL

AUTO ADJUST

Using the ▲/▼ buttons to select one of the mode. When the 

DISABLE is selected, the automatic adjustment feature is disabled.

FINE 

ó

 FAST 

ó

 DISABLE

   

FINE: Finer tuning including H.SIZE adjustment.

FAST:  Faster tuning, setting H.SIZE to prearranged data for the 

input signal.

• Depending on conditions, such as input image, signal cable to 

the projector, environment around the projector, etc., the automatic 

adjustment may not work correctly.  In such a case, please 

choose DISABLE to disable the automatic adjustment, and make 

adjustment manually.

GHOST

Adjust the settings using the ▲/▼ buttons to eliminate ghosting.

(continued on next page)

Summary of Contents for CP-CW251WN


















































































































Reviews: