Hitachi CP-CW251WN Page 112 User Manual Download

Page: 112 / 113

112

Phenomenon

Cases not involving a machine defect

Reference

page

When the

projector is

connected to

wired LAN, it

powers off and

on as described

below.

Powers off

POWER

indicator

blinks in orange a

few times

Goes into

standby mode

Disconnect the LAN cable and check that the projector

is working properly.

If this phenomenon occurs after connecting to the network,

there may be a loop between two Ethernet switching hubs

within the network, as explained below.

- There are two or more Ethernet switching hubs in a network.

- Two of the hubs are doubly connected by LAN cables.

- This double connection forms a loop between the two hubs.

Such a loop may have an adverse effect on the projector

as well as the other network devices.

Check the network connection and remove the loop by

disconnecting the LAN cables such that there is only one

connecting cable between two hubs.

–

Unable to save

the CLONING

data

USB memory is out of memory.

Please delete unnecessary files to free up memory.

At least

MB of memory is needed.

USB memory is write-protected.

Unlock the USB memory.

Unable to load

the CLONING

saved data

Unable to find the saved data from USB memory.

Execute SAVE then LOAD by going through the procedure.

File name of USB memory doesn't match.

Please assign "pj_data.bin" for setting data, and for

MyScreen "pj_logo.bmp" or "pj_logo.gif".

STANDBY mode is set to SAVING.

Switch the SAVING to NORMAL in STANDBY MODE

under SETUP menu beforehand to load the CLONING

data using control panel on the projector while the lamp

is in standby state.

Troubleshooting

• Although bright spots or dark spots may appear on the screen, this

is a unique characteristic of liquid crystal displays, and it does not constitute or

imply a machine defect.

NOTE

Phenomena that may be easy to be mistaken for machine defects (continued)

Summary of Contents for CP-CW251WN


















































































































Search results

Summary of Contents for CP-CW251WN

Reviews:

Related manuals for CP-CW251WN

Brands by name

Popular brands

Hitachi CP-CW251WN, User Manual

Search results

Summary of Contents for CP-CW251WN

Reviews:

Related manuals for CP-CW251WN

Brands by name

Popular brands