Hitachi Compute Blade 500 Series, User Manual

Page: 71 / 506

Menu items
Selection
1 Description
1
.
A value in double angle brackets, << >>, shows the default.
TPM device settings
Enable the status of Trusted Platform Module (TPM) device.
Use the following procedure for enabling the TPM Device.
1
.
Confirm that "TPM Physical Presence" value is <Asserted> in the System
Security sub menu.
2
.
Select <Disable> of "TPM Device", and press Enter.<Enable> is
displayed, and press Enter again.
3
.
"Success!!Reboot required to enable this change." is displayed.
4
.
"TPM State" menu is added in the System Security sub menu when "TPM
Device" value is <Enable>.
5
.
Select <Deactivate> of "TPM State", and press Enter.<Enable> is
displayed, and press Enter again.
TPM is activated after rebooting the server blade.
Date and Time
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-45 Data and Time menu items
Menu items Selection Description
System Date Increases or decreases the
setting value using [+], [-]
keys.
Sets the local date of the system. Sets the
date as mm/dd/yyyy.
System Time Increases or decreases the
setting value using [+], [-]
keys.
Sets the local time of the system. Sets the
time as hh:mm:ss in the form of 24 hours.
Start Options
Select an item to boot, and press Enter.
Select a target device to set boot, and press Enter. The target device will be
booted first.
The items to be displayed may be different depending on the setting of Boot
Manager.
For the details, see Boot Manager on page 2-52 .
UEFI setup menu
2-51
Hitachi Compute Blade 500 Series EFI User's Guide