Hitachi AMS 2100, Hardware Manual

Page: 173 / 306

Installation
5–55
Hitachi AMS 2100/2300 Storage System Hardware Guide
Attaching a front bezel
Complete the following steps to attach the front bezel to the array chassis.
1. Insert the key into the keyhole on the front bezel and release the lock.
2. Grasp the front bezel on both sides and above the center of the unit.
3. Engage the two hooks of the bottom of the front bezel into the slots on
the array chassis. See Figure 5-49 .
4. Push the top of the front bezel toward the chassis to engage it into the
ball catches.
Figure 5-49: Installing a Front Bezel
CAUTION! Attach and remove the front bezel carefully. Otherwise
you may pinch your fingers between the bezel and the chassis as
it snaps closed.
NOTE: When installing or removing the front bezel, be careful not to
operate the main switch or the ON/OFF button of the front bezel.
NOTE: You must unlock the front bezel before you can install it. The key
for the front bezel is required to unlock it.