background image

- 28 -

Camera And Camcorder

To Connect To AV Input

Connect  your  camera  or  camcorder  to  AV

(AV-4) input at the rear side of the TV.
• Connect your equipment to the TV via

 VIDEO

(yellow), 

AUDIO R 

(red) and 

AUDIO L 

(white)

inputs. You must connect the jacks to the in-

put using the same colour.

To Connect To S-VHS Input

Connect  your  camera  or  camcorder  S-VHS

input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS

input and audio inputs of AV inputs by using

S-VHS cables.

Connect The Decoder To The Video

Recorder

Some video recorders have a special Scart

socket for decoder.
• Connect a Scart cable to the Scart socket of

your decoder and to the special Scart socket

of your video recorder. Refer to the booklet of

your video recorder.

• To connect your video recorder to the TV, re-

fer to the TV and Video Recorder section.

If  you  want  to  connect  more  equipment  to

your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket at the rear

side of the TV, to connect headphones.

Connecting Subwoofer

Use 

Subwoofer  Out

  socket  to  connect  an

external, active subwoofer to the set to give a

much deeper bass effect.

Summary of Contents for 37LD8700U













































Reviews: