- 17 -
Common Interface
Press the button to display the Main
Menu and use the or button to highlight
the
Common Interface
line and press
the
OK button.
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to
the slot that is located in the terminal
cover at the left-hand side of the TV (from
front view).
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
3. Connect the TV to the mains supply,
switch on and then wait for few moments
until the card is activated.
Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing the
OK button. (CAM set up menu is not dis-
played when it is not required.)
To see the viewing contract information:
Enter IDTV; press the button, then high-
light
Common Interface
and press the OK
button.
When no module is inserted,
No Common
Interface module detected
message ap-
pears on the screen.
Refer to the module instruction manual for
details of the settings.
Menu System
Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the
button to enter the menu. Press
_
/
`
button to select a menu title and then
a
/
b
button to select a menu item and
_
/
`
or
OK
button to enter the menu item.
Press the
button to exit the menu.
Press the
button to return to the previous
menu.
Picture menu
By pressing
_
/
`
button, select the first icon.
Picture menu appears on the screen.
Mode
By pressing
a
/
b
button, select
Mode
.
Press
_
/
`
button to choose one of these op-
tions:
Natural
,
Dynamic
and
Cinema
.
Summary of Contents for 37LD8700U
