- 9 -
Initial Settings
When the TV is turned on for the first time, it
is in the digital mode.
Because this is the first time the TV is used,
there are no channels stored in the memory
and the following message appears on the
screen.
To start installation process, select
Yes,
to cancel select
No.
To select an option
Yes
or
No,
highlight
the item by using or buttons and press
the OK
button.
The IDTV will automatically tune to the UHF
transmission channels 21 to 68 looking for
digital terrestrial TV broadcasts and display-
ing the names of channels found. This pro-
cess will take about five minutes. To cancel
searching, you can press the button at
any time during the process.
After
Automatic Search
process is com-
pleted, the following message asking for ana-
logue channel search appears on the screen.
TV switches to the analogue TV mode.
To seach for analogue channels, select
Yes.
Press the BLUE button to cancel APS if you
do not want to delete your existing
programme list.
To continue APS, first select the country by
pressing
_
/
`
button and then press the RED
or
OK
button.
After APS is finalized, the programme table
will appear on the screen. In the programme
list you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and / or the
programme names of programmes, you can
change them in Program menu. For details
see Program menu on page 21.
To display channel list in IDTV, switch to the
IDTV via pressing the
DTT/TV
button.
Then press the button to enter main
menu,
Channel List
will be highlighted.
Press the OK button to enter the menu.
Summary of Contents for 37LD8700U
