![background image](http://html.mh-extra.com/html/hitachi/32ld7200/32ld7200_user-manual_142498039.webp)
38
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (RGB mode)
PICTURE MENU (RGB mode)
Selected characters
Setup hint
Contrast
Narrows the gap between
brightness and darkness.
Broadens the gap between
brightness and darkness.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding SELECT button at
[+31]. The colour for [+32] to [+40] numbers will change from green to
magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear.
We recommend to set at [+31].
Brightness
Black is subdued for increased
overall darkness.
Black is set off for increased
overall brightness.
Adjust to preference.
Colour
Decreases colour intensity.
Increase colour intensity.
Adjust to preference.
Hue
Enhances red and weakens
green.
Enhances green and weakens
red.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be greyed out.
Adjust for most realistic skin colour.
Picture Enhancement
Off
Low
Middle
High
Sets the clarity of small details to the desired level.
Colour Temperature
Cool
Normal
Warm
Black/White
Normally set to Normal.
Colour Temp. Adjust
Off
On
Turn On when you wish to change colour temperature is required to adjust
depending on the user's preference.
Red
Brighter scene is decreased in
reddish colour.
Brighter scene is increased in
reddish colour.
Green
Brighter scene is decreased in
greenish colour.
Brighter scene is increased in
greenish colour.
Amplitude
Blue
Brighter scene is decreased in
bluish colour.
Brighter scene is increased in
bluish colour.
Red
Dark scene is decreased in
reddish colour.
Dark scene is increased in
reddish colour.
Green
Dark scene is decreased in
greenish colour.
Dark scene is increased in
greenish colour.
Cut Off
Blue
Dark scene is decreased in
bluish colour.
Dark scene is increased in bluish
colour.
Adjust colour temperature depending on the user's preterence. These
settings are independently stored in each of the 4 Colour Temperature
modes.
Back Light
Darkens the screen.
Brightens the screen.
Adjust to preference (for the maximum visibility).
Reset
(off the function)
(waiting to reset)
The original factory settings for the items of this Menu page can be restored
by pressing the OK button.