![background image](http://html.mh-extra.com/html/hitachi/32ld7200/32ld7200_user-manual_142498022.webp)
21
ENGLISH
OPERATING INSTRUCTIONS (continued)
Size Switching (continued)
When you want to
Set the display size to
Input signal
Display screen
Remarks
Play a 14:9 image in a 16:9 screen expanded
vertically and squeezed horizontally.
C14 : 9L
(14:9 signal)
This mode is provided for the broadcasting
program with WSS code-C14:9L.
Play a 14:9 image expanded vertically on the
16:9 screen.
14 : 9Zoom
(14:9 signal)
This mode is provided for the broadcasting
program with WSS code-14:9 Zoom.
Vertical picture position can be adjusted for [Panoramic], [Zoom], [C14:9L] and [14:9Zoom] mode as follows.
1. Press ZOOM button and
ST
SELECT buttons during picture size display.
2. Position display will appear.
3. Adjustment range of each picture size are as shown below.
[Panoramic]
- 12 to + 12
[Zoom]
- 31 to + 31
[C14:9L] and [14:9Zoom]
- 16 to + 16
4. When 1080i/60 component signal is received, vertical position can be adjusted only one step up. (The range: 0 to +1)
Press
S
Press
T
Position - 31
Po 31
ATTENTION
Using a wide-screen monitor
•
This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV
program, the image would appear different from the original. Take this into consideration when making screen mode choices.
•
Use of this monitor in its enlarged display mode with the wide feature enabled in coffee shops, hotels and other establishments for
commercial or public viewing purposes could infringe on the copyright holder's right protected by Copyright Law.
•
When a normal 4:3 image is displayed over the entire screen in the Panoramic mode, parts of the periphery of the image may disappear
and/or appear distorted in some cases. Use the 4:3 mode to view images, which were created in 4:3 mode.
•
This mode allows 4:3 content to be viewed without picture distortion.
•
During RGB Input (RGB1 (set to [DVI-PC]) and RGB2 (set to [RGB]))
Normal Full Zoom1
Zoom2
Zoom3
Real*
* Real mode gives the image of the same shape as it is displayed on a computer monitor.
This mode is only available for VGA (640 X 480), WVGA (864 X 480),SVGA (800 X 600),XGA (1024 X768) and WXGA (1280 X768).
Display area selection diagram (RGB input)
Resolution
Full display
Circular display
Display Full Normal Real Zoom1 Zoom2 Zoom3
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
1366 X768
(WXGA)
Selected character
WXGA Type
32
can't select
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a
possibility that flicker may become noticeable on Zoom (1 ~ 3) depending on the display contents. If this occurs, turning the Vertical
Filter on
33 can reduce the flicker.