![background image](http://html.mh-extra.com/html/hitachi/32ld7200/32ld7200_user-manual_142498033.webp)
32
OPERATING INSTRUCTIONS (continued)
SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))
SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))
Selected characters
Setup hint
Auto Adjust*
−
Adjust
Pressing the OK button here,
Automatic regulation is started.
Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are
adjusted automatically.
Moves the horizontal position to
left.
Moves the horizontal position to
right.
Horizontal Position
Adjust the left-side display position.
Screen display changes to Magenta colour if beyond the available range.
(This function is only for RGB2. It's not available (greyed out) for RGB1
(DVI-PC).)
Moves down the vertical position Moves up the vertical position.
Vertical Position
Adjust the vertical display position.
Screen display changes to Magenta colour if beyond the available range.
(This function is only for RGB2. It's not available (greyed out) for RGB1
(DVI-PC).)
Reduces the dot clock frequency
(shrinks the right side).
Increases the dot clock
frequency (expands the right
side).
Horizontal Clock
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (greyed out) for RGB1
(DVI-PC).)
Slows the dot clock phase (shifts
slightly to left).
Advances the dot clock phase
(shifts slightly to right).
Clock Phase
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (greyed out) for RGB1
(DVI-PC).)
Reset
(off the function)
(waiting to reset)
The original factory settings for the items of this Menu page can be restored
by pressing the OK button.
Input Level
Normally set to 0.7 V. If white is found to spread across the screen, set to 1.0
V. (This is effective only for RGB2.)
Frequency Display
Off
On
Set this to Off if the frequency information of the Input Signal Screen Display
is not required.
WVGA Type
Off
On
This is only available for W-VGA signal.
When it is set to On, the display area mode can be selected Full or Real.
(With RGB1 INPUT, the screen remains the same. RGB2 (ANALOGUE)
INPUT only)
WXGA Mode
Off
This is only available for W-XGA signal.
(RGB2 (ANALOGUE) INPUT only)