![background image](http://html.mh-extra.com/html/hitachi/32ld7200/32ld7200_user-manual_142498032.webp)
31
ENGLISH
OPERATING INSTRUCTIONS (continued)
SETUP MENU (Video mode)
SETUP MENU (Video mode)
Selected characters
Setup hint
System
System1
System2
Do not change the original setting.
(System1: Europe/Asia, System2: North America)
Colour System
AV1~AV5
System1
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
System2
Auto
NTSC-M
PAL-N
PAL-M
This should correspond to the colour system of the signal from the
equipment that is connected to AV1~AV5 video input terminal.
•
Normally, set this to Auto. The system of the input signal will be
automatically recognised.
•
If the input signal contains much noise or has a low level at Auto and the
operation is found erratic, set this to match the input signal.
•
When the component signal is received, this would be not available
(greyed out).
Video Input
AV1
S. Video
Composite
This should correspond to the signal mode of the signal from the equipment
that is connected to AV1 Scart input.
AV4
Auto
HDTV
SDTV/DVD
This should correspond to the signal mode of the signal from the equipment
that is connected to AV4 video input terminal.
•
Normally, set this to Auto. The signal mode of the input signal will be
automatically recognised.
•
If the input signal contains much noise or has a low level at Auto and the
operation is found erratic, set this to match the input signal.
Scart Output
TV
Monitor
TV : AV1 (Scart) output will be fixed as TV signal output.
Monitor : AV1 (Scart) output can view the image as on the main unit. But it is
possible to monitor only the composite video signal from AV2, AV3, AV4 or
AV5 input that is displayed on the screen at the time.
•
If Descrambler is set to On, it will be fixed as TV automatically.
RGB1
DVI-PC
DVI-STB
This should correspond to the signal mode of the signal from the equipment
that is connected to RGB1 DVI terminal.
RGB2 (1st step)
RGB
Component
This should correspond to the signal mode of the signal from the equipment
that is connected to RGB2 D-sub terminal.
RGB2 (2nd step)
Auto
HDTV
SDTV/DVD
This step should be set only when [Component] is selected on the 1st step.
This should correspond to the signal mode of the signal from the equipment
that is connected to RGB2 D-sub terminal.
•
Normally, set this to Auto. The signal mode of the input signal will be
automatically recognised.
•
If the input signal contains much noise or has a low level at Auto and the
operation is found erratic, set this to match the input signal.