Hisun HS700UTV-4, Maintenance Handbook

Page: 119 / 388

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 106-
NOTE
:
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
WARNING
:
· Use only the designed quality brake fluid :
otherwise, the rubber seals may
deteriorate, causing leakage and poor
brake performance.
· Refill with the same type of brake fluid:
mixing fluids may result in a harmful
chemical reaction and lead to poor
performance.
·
Be careful that water does not enter th e
master cylinder when refilling. Water w ill
significantly lower the boiling point of th e
fluid and may result in a vapor lock.
4. Close the hood.
CHECKING THE FRONT BRAKE PADS
1. Remove:
·
front wheels
2. Check:
· brake pads
Wear indicator groove
○
a
almost disappeared
Replace the brake pads as a set.
Refer to “FRONT AND REAR BRAKES” in
chapter 5.
Brake pad wear limit ○ a
1.5 mm (0.06 in)
3. Operate the brake pedal.
4. Install:
·
front wheels
CHECKING THE REAR BRAKE PADS
1. Check:
·
brake pads
Wear indicator groove
○
a
almost disappeared