Hisun HS700UTV-4, Maintenance Handbook

Page: 110 / 388

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 97-
clean parts only. Never use gasoline or low
flash point solvents as they may cause a fire
or explosion.
b. Squeeze the excess solvent out of the
element and let it dry.
NOTE :
Do not twist or wring out the element. This
could damage the foam material.
c. Squeeze out the excess oil.
NOTE
:
The element should be wet but not dripping.
4. Install:
·
air filter element
·
air filter case cover
NOTE :
To prevent air leaks make sure that the
sealing surface of the element matches the
sealing surface of the case.
console
·
passenger seat
·
driver seat
CHECKING THE COOLANT LEVEL
1. Place the vehicle on a level surface.
2. Lift the hood up.
3. Check:
·
start the engine, warm it up for several minutes,
and then turn it off.
·
coolant level
NOTE
:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
· coolant level
The coolant level should be between the
minimum level mark
○
a
and maximum level
mark ○
b
.Below the minimum level mark
Add the recommended coolant to the proper
level.