Hisun HS700UTV-4, Maintenance Handbook

Page: 116 / 388

MAINTENANCE AND ADJUSTMENT OF THE UTV
- 103-
·
Replace V-belt:
Install the bolts
①
into the secondary fixed
sheave hold.
NOTE
:
Tightening the bolts
①
will push the
secondary sliding sheave away, causing the
gap between the secondary fixed and sliding
sheaves to
widen.
·
Remove the V-belt
①
from the primary sheave
and secondary sheave.
·
Install the V-belt.
NOTE
:
Install the V-belt so that its arrow faces the
direction shown in the illustration.
· Remove the bolts.
2. Install:
· drive belt cover
· console
· passenger seat
· driver seat
CLEANING THE SPARK ARRESTER
1. Clean:
Tap the tailpipe lightly with a soft-face hammer or
suitable tool, then use a wire brush to remove
any carbon deposits from the spark arrester
portion of the tailpipe and the inner contact
surfaces of the muffler..
2. spark
arrester
WARNING:
· Select a well-ventilated area free o f
combustible materials.
· Always let the exhaust system cool before
performing this operation.
· Do not start the engine when removing th e
tailpipe from the muffler.