Hisun HS294-2, Owner'S/Operator'S Manual

Page: 48 / 68

Periodic Service
10-16
4. After running the engine for a few minutes,
stop the engine and check the oil level
again. Add oil to the prescribed level.
Oil capacity [Filter exchanged] 1L (1.05U.S. qts.)
①
Oil Lever
②
Dipstick
■
Checking Brake Pedal
CAUTION

Stop the engine and chock the wheels
before checking brake pedal.

If movement is outside of the
specifications contact your local dealer for
adjusting the brake.
◆
Checking the brake pedal free travel
Proper brake pedal
free travel
7 to 14mm
(0.3 to in.)On the pedal
1. Release the parking brake.
2. Slightly depress the brake pedal and
measure free travel at the top of the pedal
stroke.
3. If brake pedal free travel is outside of the
specifications, contact your local dealer for
adjusting the brake.
◆
Checking the brake pedal stroke
Pedal stroke
Less than 120mm (4.7in.)
On the pedal
1. Release the parking brake.
2. Step on the pedal and measure the pedal
stroke.
3. If brake pedal stroke is outside of the
specifications, contact your local dealer for
adjusting the brake.
①
Brake pedal
②
“FREE TRAVEL”
③
“PEDAL STROKE”
■
Checking Brake Hose and Pipe
1. Check to see that brake hose and lines
are not swollen, hardened or cracked.
2. Check the brake hose and pipe joints for
oil leaks.
3. If there is any abnormality, consult your
local dealer for this service.
■
Checking Brake Light Switch
1. Park the vehicle on a flat surface and
raise the cargo bed.
2. Turn the key switch to the “ON” position.
3. Step on the brake pedal to check if the
brake
light comes on.
4. If it does not, check the bulb or brake light switch.