Hisun HS294-2, Owner'S/Operator'S Manual

Page: 42 / 68

Periodic Service
10-10
①
Range gear shift lever pivot (spray type grease )
■
Checking engine start system
CAUTION
TO avoid personal injury

Do not allow anyone near the vehicle
while testing.

If the vehicle does not pass the test, do
not operate the vehicle.
◆
Preparation before testing
1. Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆
Test gear shift range lever safety switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “L”, “H”,
“N” or REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for
this service.
①
Range gear shift lever
■
Checking wheel bolt torque
CAUTION
To avoid personal injury

Never operate vehicle with a loose
wheel bolts.

Any time these bolts are loosened they
should be retightened to the specified
torque.

Check all bolts frequently and keep
them tight.
Check wheel bolts regularly especially when
new if they are loose tighten them as
follows:
①
Torque wheel bolts to 75to 90 N.m