IP Camera User’s Manual
48/66
function, when the dome camera rotated vertically to the maximum angle, it will be rotated
horizontally 180
0
,after that, it will continue to rotated vertically.
[Proportional Pan]:
Enable or disable proportional pan. If the function is disabled, you can
drag the speed change lever to change the PTZ speed; If you enable the function, the speed of
PTZ will be changed according to the proportional, the bigger proportional, the lower speed of
PTZ.
[Set Azimuth Zero]:
If you set azimuth zero, the device will be rotated to there after power on
and tests by itself when click this button. If you delete the azimuth zero, it will be rotated to the
machine zero.
[Manual Limit set]:
Enable or disable the manual limit set. The dome can be only rotated in
the range as you set if enable this function.
[Scan Limit set]:
Enable or disable the scan limit set. If you enable this function, the dome
can be only rotated in the range as you set when it is scanning.
[Scan Speed Set]:
Pan Scan Speed:1-40
0
/s
Tilt Scan Speed:1-20
0
/s
[Park]:
Park Mode: You can set what you want the dome to do when it is in park mode.
Park Time: 2-60min.If you set it as 3min,it means when there is no task for dome, after 3min it
will start park mode.
Note
：
：
：
：
The priority of task that set in [Time set] is higher than that of
[Park]. For example, the demo is doing the task that set in [Park] when enable
task in [Time set], it will stop and turn to the latter.
[Preset Tour]:
You can set two preset tours, each of them can include 8 presets, and can set
stay time for each preset.
[Time set]:
On-off: Enable or disable the time set.
Task: Set the tasks that you want the dome to do.
Start/Close:Set the start and close time.
