IP Camera User’s Manual
33/66
uploading. E-Mail server can be set up in
[Mail Settings]
, FTP server can be set up in
[FTP
Settings]
.
After setting all the parameters, click
[save]
to make the parameters valid.
5.2.5 Alarm Settings
5.2.5.1 Motion detection
See Figure 35 for the interface of “Motion detection”:
Figure 35
In this page, users can set features like motion detection on/off, sensitivity, detection time,
linkage alarm output, alarm output duration, E-mail sending when alarm been triggered,
linkage snapping/recording, etc.
[Enable detect]
:Enable or disable motion detection.
[Sensitivity]
:Sensitivity range is 1~5, greater value means higher sensitivity.
[Deployment Time]
:
Set the period of time for motion detection, two periods allowed.
[Alarm output]
: Enable or disable linkage alarm output
[Alarm Output duration]
:
Set the duration of the linkage alarm output after being triggered (in
