IP Camera User’s Manual
37/66
[Snap]
: When alarm is triggered, the device SD card will be driven to snap pictures. The
pictures can be saved via E-mail sending or FTP uploading. For snapping parameters, if the
number of pictures snapped at one time is set as 10, and the snapping interval is 1 second,
that means when there is an alarm, 10 pictures will be snapped and the interval between
each picture is 1 second.
[Record]
: When alarm is triggered, the device SD card will be driven to record images. The
record files can be saved via E-mail sending or FTP uploading.
After setting all the parameters, click
[save]
to make the parameters valid.
Notice
：
：
：
：
Record file packet time equals duration of alarm add the recocd time setted in
[Linkage
recording]
.
When network failure occurs, E-mail sending and FTP uploading cannot be performed,
the pictures and recorded files will be stored in SD card. E-mail sending and FTP
uploading will resume after network is recovered.
5.2.6 Dome Camera
5.2.6.1 Camera Setting
See Figure 38,39,40,41 for the interface of “Camera Setting”:
