IP Camera User’s Manual
19/66
Figure 18
[Enable Mask]
: Enable or disable video masking.
[Mask area set]: Click and move cursor to set image masking area, an image can be entirely or
partially masked, maximum 4 areas supported.
[All]
: Mask the whole image.
[Cls]
: Clear masked areas.
After you set these parameters, please click
to make them valid.
5.2.2.4 Picture Parameter
See Figure 19 for the interface of “Snap picture Parameter Setting”:
Figure 19
[Snap picture parameter setting]
: Supports only images of JPG format currently, megapixel
camera definition is the same as set in
[video definition]
,other cameras can choose different pixel by
yourself.
After you set these parameters, please click
to make them valid.
