IP Camera User’s Manual
15/66
5.2 Remote config
5.2.1 Audio Setting
See Figure 15 for the interface of “Audio Setting”.
Figure 15
[Enable audio]
:
turn on or turn off the audio of IP camera, When there is no need for audio,
close audio input to save DSP resource and network resource. Audio is disabled by default.
[Input type]
:You can choose MIC or Line In input.
[Type]
:Support three types of audio compressed format:G.726,G.711A,G.711U,AAC.
[Sampling]
:Support audio sample rates of 8k ,16k and 32k.
When you select AAC format, sample
rate is fixed at 32K
[Input Volume]
:Adjust the device’s input volume to control the volume of Listen.
[Output Volume]
:Adjust the device’s output volume to control the volume of Call.
After you set these parameters, please click
to make them valid.
5.2.2 Video Settings
5.2.2.1 Text Overlay
See Figure 16 for the interface of “
Text Overlay
”:
