Hirschmann OCTOPUS 8M Series, User Manual

Page: 19 / 46

Installation OCTOPUS 8M/16M/24M/OS32
Release 11 01/2013
19
1.5.7 V.24 interface (external management)
At the V.24 connection, a serial interface is provided for the local connection
of an external management station (VT100 terminal or PC with
corresponding terminal emulation). This enables you to set up a connection
to the Command Line Interface (CLI) and to the system monitor.
The socket housing is electrically connected to the housing of the device.
For devices with PoE the V.24 interface uses the housing potential, and for
devices without PoE it uses the supply voltage potential.
Figure 1: Terminal cable for connecting an external Management Station
You will find a description of the V.24 interface in the “Basic Configuration
User Manual” on the CD-ROM.
Note: You will find the order number for the terminal cable, which is supplied
separately, in the Technical Data chapter (see page 42) .
VT 100 terminal settings
Speed 9,600 Baud
Data 8 bit
Stopbit 1 bit
Handshake off
Parity none
Figure Pin Function
1 TX. Transmit Data
2 RX Receive Data
3 N.C. Not used
4 GND Ground
Table 6: Pin assignment of the V.24 interface (M12 socket)
5
M12 M12 DB9 DB9
2
3
5
1
2
3
4
1
2
3
4
6
7
8
9