Hirschmann OCTOPUS 8M Series, User Manual

Page: 22 / 46

22
Installation OCTOPUS 8M/16M/24M/OS32
Release 11 01/2013
2 Device installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
The following procedure has been proven to be successful for the assembly
of the device:
 Unpacking and checking

Installing the SFP transceivers (optional)
 Connecting the connector for supply voltage and signal contact

Installing the device

Grounding the device
 Connecting the PoE supply voltage (optional)

Connecting the supply voltage, starting up
 Connecting the data lines
Note: Dust, moisture and fire protection is only achieved under the following
conditions:
 All the unused connections and ports are closed with locking screws.

All the connectors and cables connected also fulfill protection class
IP65/67.
2.1 Unpacking and checking

Check whether the package includes all items named in chapter “Scope
of delivery” on page 41 .

Check the individual parts for transport damage.
2.2 Installing the SFP transceivers (optional)
Note: Only use SFP transceivers intended for the operation of OS32 devices
(see on page 42 “Accessories”) .
You have the option to combine these transceivers with each other in any
way or also to leave SFP slots unoccupied.

Before attaching an SFP transceiver, first remove the protective cap over
the socket.

Push the SFP transceiver with the lock closed into the socket until you
hear it latch in.