Configuration Setup
© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: [email protected] · www.hirschmann.com
16
24 183 19 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
Calling up the function:
(automatically with system restart if shut down time longer than 2 hours ago)
Actuate
"SEL"
key
Overview menu with symbols appears, with any previously programmed
limits. In this menu screen, the operator is prompted to confirm the
previous made entries or to renew the setup.
The system will temporarily interrupt the movements of the crane during the
setup procedure.
Check the displayed values before confirming them!
•
Start setup procedure
or
confirm previous settings:
Setup reeving
START
configuration setup procedure
OK
, only if all entries are correct
The entering of the mode of operation code is completed after this confirmation,
and the normal operation screen is displayed.
•
Select main boom with or without man basket:
1=boom operation 2=man basket operation
Cursor to next position
Cursor to previous position
Confirm selection, go to next step
>