Hirschmann BAT-R, User Manual, Page: 66 / 70

66
Installation BAT-R
Release 09 03/2017
For reliable receive power and transmission power, you require antennas
that pertain to your application case.
The "Antenna Guide" document provides an overview of the antennas
that can be used as well as the suitable antenna accessories.
This document is available for download as a PDF file on the Hirschmann
product pages (www.hirschmann.com).
Gigabit Ethernet SFP transceiver Order number
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC-EEC 943 896-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC-EEC 943 897-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC-EEC 943 898-001
M-SFP-LH+/LC 943 049-001
Other accessories Order number
2-pin terminal block (50 pieces) for signal contact 943 845-010
50 Ω terminating resistors for closing unused antenna connections, N
(10 pieces)
942 117-001
Antenna cable BAT-CLB-2 N m-f 943 903-514
AutoConfiguration Adapter ACA21-USB (EEC) 943 271-003
For device variants featuring supply voltage with characteristic
value C or W:
2-pin terminal block (50 pieces) for supply voltage 943 845-009
For device variants featuring supply voltage with characteristic
value K:
3-pin terminal block (50 pieces) for supply voltage 943 845-008
Network management software Industrial HiVision 943 156-xxx
Rail Power Supply RPS60/48V EEC 943 952-001
Rail Power Supply RPS 30 943 662-003
Rail Power Supply RPS 80 EEC 943 662-080
Rail Power Supply RPS 120 EEC (CC) 943 662-121
Plug casing for IP67 V1 plug acc. to IEC 61076-3-106 (variant 1) Available at BTR
NETCOM GmbH
Terminal cable: M12 plug, 8-pin on DB9 socket 942 087-001
Wall mounting plate for DIN rail mounting, width 5.91 in (150 mm) 943 971-004