Hirschmann BAT-R User Manual Download Page 2

The naming of copyrighted trademarks in this manual, even when not specially indicated, should 
not be taken to mean that these names may be considered as free in the sense of the trademark 
and tradename protection law and hence that they may be freely used by anyone.

© 2017 Hirschmann Automation and Control GmbH

Manuals and software are protected by copyright. All rights reserved. The copying, reproduction, 
translation, conversion into any electronic medium or machine scannable form is not permitted, 
either in whole or in part. An exception is the preparation of a backup copy of the software for 
your own use.

The performance features described here are binding only if they have been expressly agreed 
when the contract was made. This document was produced by Hirschmann Automation and 
Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right 
to change the contents of this document without prior notice. Hirschmann can give no guarantee 
in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network 
components or the associated operating software. In addition, we refer to the conditions of use 
specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site 
(www.hirschmann.com).

Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany

Installation BAT-R

 20.03.2017

Summary of Contents for BAT-R







































































Reviews: