Hirschmann BAT-R, User Manual, Page: 18 / 70

18
Installation BAT-R
Release 09 03/2017
This device has been designed to operate with the antennas listed below
having a maximum gain of 18 dBi:
The use of antennas missing in this list is strictly prohibited. The required
antenna impedance is 50
Ω .
Note (1): When using 3 antennas type BAT-ANT-RSMA-2AGN-R, you
must align each antenna in another spatial direction (x-y-z) so that one
antenna is arranged vertically to the device and the other two antennas
are arranged at right angles to each other.
Note (2): Connect the BAT-ANT-N-MiMo-18N-IP65 antenna to the WLAN
module as follows:

Connect the antenna port "Ver" with the WLAN antenna port 1.

Connect the antenna port "+45°" with the WLAN antenna port 2.

Connect the antenna port " − 45°" with the WLAN antenna port 3.

Connect the BAT-ANT-N-MiMo-18N-IP65 in this way exclusively.
Differing connection configurations are illegal.

Note for the use in the Japan
This note applies to BAT-R variants with the characteristic
value JP (Japan) for country approvals that are labeled as follows:

"Contains MIC ID: 204-310014"

Devices with the characteristic value JP for country approvals are suitable
for usage with the following antennas:
Antennas operating with this device
model: Permitted band of operation
2.4 GHz band
5.15 GHz ...
5.25 GHz band 5.725 GHz ...
5.825 GHz band
BAT-ANT-RSMA-2AGN-R
(1)
Yes Yes Yes
BAT-ANT-N-3AGN-IP67 Yes Yes Yes
BAT-ANT-N-MiMoDB-5N-IP65 Yes Yes Yes
BAT-ANT-N-MiMo5-9N-IP65 No Yes Yes
BAT-ANT-N-8G-DS-IP65 Yes No No
BAT-ANT-N-MiMo-18N-IP65
(2)
No No Yes
Antennas for operation with this device: Permissible frequency bands
2.4 GHz band
5 GHz band
BAT-ANT-N-3AGN-IP67 Yes Yes
BAT-ANT-RSMA-2AGN-R Yes Yes
BAT-ANT-6ABG-IP65 Yes Yes
BAT-ANT-N-MiMoDB-5N-IP65 Yes Yes
BAT-ANT-N-8G-DS-IP65 Yes No
BAT-ANT-N-9A-DS-IP65 No Yes
„5GHz band: この製品は屋内においてのみ使用可能です “