30
Installation BAT-R
Release 09 03/2017
1.5
Ethernet ports
You can connect end devices and other segments to the device ports using
twisted pair cables or optical fibers (F/O).
You find information on pin assigments for making patch cables here:
1.5.1
Gigabit combo port
You have the option of alternatively connecting a twisted pair cable via a
RJ45 socket or an optical fiber via a SFP transceiver to a combo port.
Only plug a connector or SFP transceiver that you want to use for the data
transmission into the socket of the combo port.
10/100/1000 Mbit/s PoE PD port
Device variants featuring supply voltage with the characteristic value P
or W have this port exclusively.
The 10/100/1000 Mbit/s PoE PD port offers you the ability to connect
network components according to the IEEE 802.3 10BASE-T/100BASE-
TX/1000BASE-T and IEEE 802.3af/at standard.
This port supports:
Autocrossing (if autonegotiation is activated)
Autonegotiation
Autopolarity
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
1000 Mbit/s full duplex
Delivery state: Autonegotiation activated
The socket housing is electrically connected with the front panel.
The pin assignment corresponds to MDI-X.
When using 10/100 Mbit/s, the PoE power is supplied via the signal-
transmitting wire pair (phantom voltage) or via the free wire pairs (spare
pair supply).
10/100/1000 Mbit/s twisted pair port
Device variants featuring supply voltage with the characteristic value C
or K have this port exclusively.
The 10/100/1000 Mbit/s twisted pair port offers you the ability to connect
network components according to the IEEE 802.3 10BASE-T/100BASE-
TX/1000BASE-T standard.
This port supports:
Autocrossing (if autonegotiation is activated)
Autonegotiation
Autopolarity
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
1000 Mbit/s full duplex
Summary of Contents for BAT-R
Page 70: ......