34
Installation BAT-F
Release 06 02/2014
2
Installation
Before installing and starting up the device, read the safety instructions.
See “Safety instructions” on page 5.
To protect the exposed uninstalled contacts of the components from dirt,
connect the individual system components in a dry and clean working
area.
If your device is equipped with an impact protection, proceed as follows when
mounting the components:
Remove the impact protection.
Mount the components.
Mount the impact protection.
The device fulfills the protection class IP65/67 under the following conditions,
exclusively:
All the connectors and cables connected also fulfill protection class
IP65/67.
The locking screws seal all unused connections and ports. The locking
screws also fulfill the protection class IP65/67.
2.1
Overview
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
The following steps should be performed to install and configure a device:
Unpacking and checking the content of the package
Installing and grounding the device
Installing an SFP transceiver (optional)
Installing the antennas
Connecting the power supply and signal lines
Operating the device
Connecting data cables
Summary of Contents for BAT-F
Page 72: ......
