Hirschmann BAT-F, User Manual

Page: 31 / 72

Installation BAT-F
Release 06 02/2014
31
1.9 Management interfaces
1.9.1 V.24 interface (external management)
This interface is designed as an 8-pin, A-coded M12 plug.
The V.24 user interface is serial and allows you to connect the following
devices directly:
 External management station (VT100 terminal or PC with appropriate
terminal emulation). With this management station, the Command Line
Interface (CLI) is available to you. Furthermore, the system monitor is
available to you at the system start.
You will find more information here:
–
See table 10 on page 32.

BAT-F device. Connecting the BAT-F device allows you to automate the
configuration of a point-to-point WLAN line by connecting two devices
directly via the serial interface.
You will find more information here:
– User Manual Configuration and Administration Guide
–
See table 11 on page 32.
The socket housing is electrically connected to the housing of the device. The
V.24 interface is electrically insulated from the working voltage.
Note: Only use a shielded cable.
VT 100 terminal settings
Speed 115200 bit/s
Data 8 bit
Stopbit 1 bit
Handshake Hardware
Parity none
Pins of the M12 socket
on the device Pin Function Description of functions
1 GND Ground
2 DTR Data terminal ready
3 TxD Transmit data
4 RxD Receive data
5 DCD Data carrier detect
6 DSR Dataset ready
7 RTS Request to send
8 CTS Clear to send
Table 9: Pin assignment of the V.24 interface, 8-pin, A-coded M12 socket
8
2
3
4
7
6
1
5