Hirschmann 943 893-321, Manual

Page: 5 / 36

3
Version 1.0 03/06
FCC RULES
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursu-
ant to part 15 of the FCC Rules. These limits are desi-
gned to provide reasonable protection against harmful
interference when the equipment is operated in a com-
mercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not instal-
led and used in accordance with the instruction manual,
may cause harmful interference to radio communicati-
ons. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
C-Tick
Australia / New Zealand
This product meets the requirements of the
AS/NZS 3548 standard.
N13320
Certifications
Note:
Only the certifications indicated on the label attached to
each device are applicable.
Relevant information for North America:
䊳
Only for connection with a Class 2 power supply.
䊳
For use in Class 2 Circuits.
䊳
Use 60/75 or 75 °C copper(CU)wire only.
Recycling note
,
After usage, this product must be disposed of
properly as electronic waste in accordance with
the current disposal regulations of your county/
state/country.