For Support visit www.hipsmarthome.co.uk or call 01704-807114
2.
Hip SmartTV – Connection / Setup
2.1.
Setup Guide
2.1.1.
Remove the cover from your SmartTV by inserting your fingers through the openings on
either side of the cabinet and gently pulling apart and towards you. The cover will come away
from the base.
2.1.2.
Inside the SmartTV should be 1 x Ethernet Patch Cable. Take the Patch Cable and insert one
end into one of the spare Ethernet Ports on the Network Switch inside the SmartTV cabinet. Plug
the other end into your Router. There is a knockout hole in the top and bottom of the cabinets
which can be used to feed the cables through.
2.1.3.
Once connected, power up your Network Switch at the Mains socket and your Ethernet
Sockets will now be live.
2.1.4.
Repeat Steps 9-13 above.
2.1.5.
Once you have established that each device is working, you can replace the SmartTV cover
by sliding it back into place.
The Hip SmartTV distributes your internet
connection to six hardwired connection points
(Ethernet sockets) around your home.
To begin, you will need to have installed your
Broadband Router and Hip SmartHub as described
above.
