For Support visit www.hipsmarthome.co.uk or call 01704-807114
6.
When the LED becomes solid green, the process is complete and the defaults have
been restored.
7.
Once a zone is reset, you will need to re-setup the zone as described in 3.17.4. If
you are resetting all zones, you will need to Setup a New System as described in
3.17.5.
3.17.4.
Re-Setting up a Zone
The Zone must be reset as described above before setting up. This state is indicated by a
solid green light. Once you have a solid green light proceed as follows;
1.
From the Settings Menu, select Add a Nuvo Component.
Fig.25