Hioki SS7081-50, Instruction Manual

Page: 14 / 71

11
2 Preparations
2.1 Preparation Process
Thoroughly read “Usage Notes” (p. 3) beforehand.
(1) Position the instrument as desired. (p. 3)
(2) Connect the power cord. (p. 11)
(3) Connect the output cable. (p. 12)
(4) Set the IP address. (p. 15)
(5) Connect the LAN cable. (p. 16)
(6) Turn on the instrument. (p. 17)
2.2 Connecting the Power Cord
WARNING
• Confirm the supply voltage to the instrument matches the supply voltage indicated on the
instrument before connecting the power cord to the instrument. Connection to an improper
supply voltage may damage the instrument and present an electrical hazard.
• To prevent an electric shock and to maintain the safety specifications of the instrument, connect
the power cord provided only to an outlet.
Connect the power cord to the instrument power supply inlet and the outlet.
Item to prepare: Power cord (instrument accessory)
1
Set the main power supply switch to OFF.
2
Check that the outlet voltage and instrument power supply voltage match.
3
Connect the power cord to the instrument power supply inlet.
4
Connect the power cord to the outlet.
If power interrupts (a breaker tripped, etc.) while the instrument is on, the instrument will automatically start once the
power supply is restored next time.
HIOKI SS7081C961-00