Hioki SM7860 Series, Instruction Manual

Page: 9 / 64

5
Operating Precautions
Installing the device
WARNING
• Ventilation holes for heat radiation are provided on the side and rear panels of
the device. Leave sufficient space around the ventilation holes and install the
device with the holes unobstructed. Installation of the device with the ventilation
holes obstructed may cause a malfunction or a fire.
• Unplugging the power cord kills power to the device. Be sure to provide enough
unobstructed space to unplug the power cord immediately in an emergency.
Installing the device in inappropriate locations may cause a malfunction of device
or may give rise to an accident. Avoid the following locations:
•
Exposed to direct sunlight or high temperature
• Exposed to corrosive or combustible gases
•
Exposed to a strong electromagnetic field or electrostatic charge
• Near induction heating systems (such as high-frequency induction heating
systems and IH cooking equipment)
• Susceptible to vibration
•
Exposed to water, oil, chemicals, or solvents
• Exposed to high humidity or condensation
•
Exposed to high quantities of dust particles
CAUTION
Failure to observe the following precaution may result in bodily injury.
• The device weighs approx. 47 kg (Model SM7860-57 and SM7860-67: approx. 34 kg).
It should be moved by at least two people, who should grip it using the handles on the
left and right sides. The center of gravity is located on the front side of the device.
• The device is heavy. When transporting it, follow your company’s workplace safety
standards to assure safety (for example, by wearing non-slip gloves and protective
footwear).
Do not place the device on an unstable table or inclined place. Dropping or knocking
down the device can cause injury or damage to the device.