Hioki IR3455, Instruction Manual

Page: 128 / 184

5.2 Checking Recorded Data
122
Detailed Data Screen
Press the key on the representative data screen, after
which will blink and reveal the detailed data screen.
The LCD shows the data from the first step.
Press the keys shown in the table below to switch the indica-
tion.
Indications to be switched Keys used
Switch to data of another step.
key
Insulation resistance

Leakage current
key
Elapsed time to each step

Temperature/humidity key
Date of measurement

Measurement time

Data
key
Go to the representative data screen.
key
Return to the standby screen.
key
Test voltage setting

Actual output voltage
(Ex. 5.00 kVSET

5.25 kV)
Automatic
switching
As leakage current data is not stored in the
memory, it is calculated again from the
voltage and the resistance to display. The
recalculated data may vary from the
leakage current before recording by ±1%.
When the resistance is 0.00 M

, [ - - - ]
appears.