Hioki BT4560, Instruction Manual, Page: 19 / 62

16
3 Message Reference
Message Reference Interpretation
< > : Indicates the contents (character or numeric parameters) of
the data portion of a message. Character parameters are
returned as all capital letters.
Numeric Parameters:
• NRf Number format may be any of NR1, NR2 and NR3
• NR1 Integer data (e.g.: +12, -23, 34)
• NR2 Fixed-point data (e.g.: +1.23, -23.45, 3.456)
• NR3 Floating-point exponential representation data
(e.g.: +1.0E-2, -2.3E+4)
Shows the command
description.
Shows the message
syntax.
Explains the command
data or response message.
Describes the message.
Shows an example of
an actual command
application. (Normally
described with HEADER OFF
[except the HEADER
command itself].)
Read/Write the Standard Event Status Enable Register (SESER)
Syntax
Command
*ESE
<0 to 255 (NR1)>
Query
*ESE?
Response
<0 to 255 (NR1)>
Description
Command The SESER mask is set to the numerical value 0 to 255.
The initial value (at power-on) is 0.
Query
The contents of the SESER, as set by the *ESE
command, are returned as an NR1 value (0 to 255).
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
Example
*ESE 36
(Sets bits 5 and 2 of SESER)
Command, Query
Response
Controller
Instrument