Hioki BT4560, Instruction Manual, Page: 16 / 62

13
2 Message List
Message Data Formats Description
[ ]: Omissible
[ ]: Omissible
( ): Response data
Standard Commands
*IDN?
(<Manufacturer name>,<Model name>,
<Serial number>, <Software version>)
Queries the Instrument ID.
*RST Initializes the Instrument.(Normal Reset)
*TST? (0 to 1) Initiates a self-test and queries the result.
*OPC Sets an OPC after execution completion.
*OPC? (1) Queries execution completion.
*WAI Wait for operations to finish.
*CLS
Clears the Status Byte Register and the
related ques.
*ESE 0 to 255
Sets the Standard Event Status Enable
Register.
*ESE? (0 to 255)
Queries the Standard Event Status Enable
Register.
*ESR? (0 to 255) Queries the Standard Event Status Register.
*SRE 0 to 255 Sets the Service Request Enable Register.
*SRE? (0 to 255)
Queries the Service Request Enable
Register.
*STB? (0 to 255) Queries the Status Byte Register.
*TRG Executes one sampling.
Instrument Model Name
:QPID (BT4560) Queries the instrument model name.
Event Registers
:ESE0 0 to 255
Sets the Event Status Enable
Register 0.
:ESE0? (0 to 255)
Queries the Event Status Enable
Register 0.
:ESR0? (0 to 255) Queries the Event Status Register 0.
:ESE1 0 to 255 Sets the Event Status Enable Register 1.
:ESE1? (0 to 255) Queries the Event Status Enable Register 1.
:ESR1? (0 to 255) Queries the Event Status Register 1.
I/O
:IO:MODE? (NPN/PNP) Queries the NPN/PNP switch status.
Measurement Functions
:FUNCtion RV/ZV/R/Z/V Sets the measurement function.
:FUNCtion? (RV/ZV/R/Z/V) Queries the measurement function.
Measurement Frequency
:FREQuency <Frequency> Sets the measurement frequency.
:FREQuency? (<Frequency>) Queries the measurement frequency.
Measurement Range
:RANGe <Measurement range> Sets the measurement range.
:RANGe? (<Measurement range>) Queries the measurement range.
Sampling Speed
:SAMPle:RATE <V/Z>, <FAST/MEDium/SLOW > Sets the sampling speed.
:SAMPle:RATE?
<V/Z>
(<FAST/MEDIUM/SLOW >)
Queries the sampling speed.
Sample Delay
:SAMPle:DELay:MODE WAVE/VOLTage Sets the sample delay mode.
:SAMPle:DELay:MODE? (WAVE/VOLTAGE) Queries the sample delay mode.
:SAMPle:DELay:WAVE <Wavenumber> = 0.0 to 9.0
Sets the sample delay with the frequency of
the alternating current signal.
:SAMPle:DELay:WAVE? (<Wavenumber>)
Queries the sample delay frequency of the
alternating current signal.
:SAMPle:DELay:VOLTage
<Deviation of voltage fluctuation >
=0.001 to 10.000
Sets the sample delay with the deviation of
voltage fluctuation.
:SAMPle:DELay:VOLTage? (<Deviation of voltage fluctuation >)
Queries the sample delay deviation of
voltage fluctuation.