Hioki 9605-01, Instruction Manual, Page: 45 / 100

39
────────────────────────────────────────────────────
6.2 Timer Control of Output
────────────────────────────────────────────────────
6.2.1 Harmonic Analysis
NOTE
6.2.2 Relationship Between the Number of Output Items and
Interval Time
Number of setting items Minimum interval time
FDD only 1 to 70,
71 to 400
400 or more 10 s
20 s
(20 s + 10 s)/370 items
Printer only 1 to 60 lines
every 60 lines 10 s
+10 s
FDD+Printer 1 to 60
every 60 Total value of FDD only
and printer only
NOTE
NOTE
6.2 Timer Control of Output
You can set control times to output automatically at those times.
1. Set the control time.
2. Select the output items.
3. Press the
START/STOP
key to start operation.
･
For the basic method of using the timer control, refer to the Instruction
Manual for the 3194 product. Section 7.2, "Setting the Control Time"
･
The minimum interval which can be specified is varied automatically,
depending on the number of output items.
The maximum number of items to be output and corresponding minimum
interval times for output to floppy diskette or printer are determined
automatically as follows.
･
For integration data, one data value is regarded as two values.
･
Waveform data cannot be output to a printer or floppy disk.
Specifications of the floppy disk data for the 9605-01(Harmonic Analysis)
Harmonic data is output appended to the end of a line of ordinary
measurement data. The output sequence is as shown in the table on the
following page. The data for each of the harmonics in the list is output
consecutively. If the time averaging or peak hold functions are active, the
corresponding values (the same as on the screen) are output.
･ The suffixes (n) are output as two digit values (xx), with a leading space
in the case of a single-digit value.
Example "U1( 3),I2(23)"
The channel numbers, such as 1, 2, and 3 in "U1," "U2," and "U3"
change, for example to "U4," "U5," and "U6," depending on the analysis
channel settings.
･
The suffixes (n) output by the sort function indicate the sequence. The
harmonic order is not output.