Hioki 9605-01, Instruction Manual, Page: 41 / 100

35
────────────────────────────────────────────────────
────────────────────────────────────────────────────
NOTE
Chapter 5
Hold Function
Press the panel
HOLD
key to freeze the display of all items on the screen. In
this case, by switching the screen selection, you can view harmonic data for
the same time interval which was not displayed.
Since internally the measurement continues, each time you press the
HOLD
key the values at that time are displayed. To end the hold function, hold
down the
SHIFT
key and press the
HOLD
key.
The following measurements are also possible.
When combined with the interval timer, the results of analysis at the end of
each interval can be displayed.
･
The hold function applies to the whole 3194 product.
Refer to the following sections in the instruction manual of the 3194.
Section 6.1, "Hold Function", and 7.2, "Setting the Control Time."
･
Averaging is not supported.
･
Peak Hold function is not supported.
･ If using the sort function, output is in maximum sort order but the hamonic
order are not output.