Opens a list of Event Log functions. The user can view and
clear logged events and copy logs to SD memory card. See
for instructions.
Used to exclude alarms from the Common Alarm activation
list. By default, all alarms, when active, will annunciate the
Common Alarm. See
for instructions.
This icon shows relay configuration and control options. Use
it to configure relays and reset or clear any latched alarm
relays. To change a relay configuration, execute the ‘Relay
configuration’ command then select the relay you wish to
configure.
Refer to the following sections for details on:
• Changing Main Board Relay Parameters –
• Changing Auxiliary Board Relay Parameters –
• Resetting Latched Alarm Relays –
HindlePower Inc
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Copyright HindlePower Inc. 2021
Page 78 of 171
